Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Overview

This document outlines the steps required to set up “Email-To-Push” for your AppArmor app. This allows for very easy integration with existing notification systems.

There's a good overview of the feature on our blog: http://blog.apparmor.com/post/new-feature-send-push-notifications-by-emailing-your-safety-app

Getting Started

Configuring the feature is easy!  First, we need to know what the "from" email address is for your mass notification system. You should:

  1. Send a message through your existing system to the email address support@apparmor.com
  2. We’ll look at this email and whitelist the email address that it came from.

Testing

Next, you’ll test your configuration using “Draft Mode”. To test, you can put some of your staff devices into "draft mode".  This is done be completing these steps within the app:

  1. Launch your app on your phone
  2. Tap "About / Preferences" -> "Notification Settings"
  3. You should see a "Version 4.xx.xxxx" label at the bottom of the screen. Tap it 7 times in a row.
  4. A password dialog will appear. Enter your draft password.
  5. You'll notice a "Disable Draft Mode" button appear below the version number. This means you are now subscribed to "draft" notifications. (When you are done testing, you can tap that button to unsubscribe from "draft" notifications.)

Next, send an email from your mass notification system to [yourschool].draft@push.apparmor.com (explanation below).  Any devices subscribed to "draft" notifications should receive the message.  If there are any issues with testing, please let your support contact know!

Using Email-To-Push

There are two email addresses that you will use for email-to-push on their app.  There is a "draft" email address for testing, and a "production" email address to send messages to all the app users.

The email addresses correspond to the url of your AppArmor Dashboard. For example, if your Dashboard was http://[yourschool].apparmor.com, the email addresses would be:

Ask your support contact if you are unsure about which email you should send to. 

Configuring Email-To-Push

Refer to the

Production Sending

Congratulations! You’re now set up to use Email-To-Push. Send production messages by emailing [yourschool]@push.apparmor.com


Questions and Assistance

If you have questions or require assistance, contact your AppArmor onboarding or support representative.

  • No labels